Tips From the Moving Business Pros: How to Move a Pinball Device



With pinball making a substantial resurgence across the nation, Mild Giant wants to ensure that these traditional, lovely machines stay damage-free while being transferred. Oh, and we desire the people moving them to be safe, too.

At first glimpse, pinball makers can appear frightening to move because of their weight, fragility, and size. The good news is, our skilled Giants have a few tricks up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

The bulk of modern pinballs (made in the last 20 years or two) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, utilizing either two or four bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.

Later machines have hinges and use a locking system to keep the headbox upright. There might likewise be two bolts inside as added safety, in case the lock is broken or inadvertently un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you have to remove the headbox rear access panel to get to the bolts and plugs within. Generally this panel has a lock on it to keep it in location, but in time the key might have been lost. Frequently, there is a screw keeping this panel in location.

Once inside, remove the bolts and unplug the big adapters that have circuitry decreasing into the machine. You may want to label these ports to put them back in the ideal area, however they should be different sizes, making it challenging to plug back incorrectly.

You can now eliminate the headbox totally, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Solid State Pinballs

For early Solid State Pinballs, you will need to eliminate the back glass. There is a lock situated on the headbox in among 3 areas: the left-hand side at the top, right-hand side at the top or on top of the headbox in the center.

When opened, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), then pull it out from the bottom.

Then, open the back box light panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out to you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise the light panel in order to swing it open.

Now that you are within, you can get rid of the bolts, and any plugs that have wires decreasing into the maker. You may wish to label these plugs to put them back in the right spot. You may not have to remove the plugs, as the electrical wiring ought to be long enough to enable the headbox to be folded down.

At navigate here this moment, you can secure the light panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the provided secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a basic setup and needs no tools.

You're done if you can now fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

If you can not fold the head box down, then you need to get inside. There is a lock located at the top of the back glass in the center. Use the supplied key to unlock, and remove the back glass by lifting it up from the bottom, and then pulling it out from the bottom.

Next, you will have to remove the display panel. You can do this by lifting it up and out. Open the lamp panel. There will be a latch situated on either the left-hand or right-hand side. (Some more recent Williams and Bally pinballs do not have a different amp panel, it becomes part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Eliminate the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Removing the Legs.

Pinball Maker legs are held in location by 8 bolts. The modern-day pinballs have captive nuts or threaded plates inside for the bolts to screw into.

However these threaded plates and captive nuts can be harmed, and using extra nuts may have been required. If this holds true, you will require to open the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and get rid of the lock down bar. Slide out the playfield glass, and put in a safe place. Next, raise up the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.

You need to now have access to any nuts that might have been utilized. As soon as any nuts have actually been eliminated, change the playfield glass and lock down bar, and lock the front door.

Make sure to mark or remember which legs are for the front and back, as they will be adjusted differently to suit.
Loading the Pinball.

You are now ready to transport your pinball machine. Prior to you fill it, make certain you get rid of the pinballs so they do not bounce around throughout transportation.

If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just prior to loading the machine. Get a pal to help and have one of you supporting the pinball, while the other removes the front legs.

Make sure you strap the pinball in, as you do not want it moving if you have to stop unexpectedly!

For Electro-Mechanical pinball makers, you require to eliminate the headbox rear gain access to panel to acquire access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later check here on Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it may be much easier to get rid of the legs simply prior to packing the machine. Grab a friend to assist and have one of you supporting the pinball, while the other eliminates the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *